1.通用基础资料：增加模具检验项目、保养项目下拉接口 2.模具管理：点检项目、点检标准、保养项目、保养标准、导入接口

yl

2023-10-13 ecebb28b60d49eeac50dfa3c9a812a0a221e55ae

 VueWebCoreApi/Tools/ImportExcelData.cs

@@ -1063,25 +1063,25 @@
                Message = "模具清单模板：表头信息不符合规范,第1列应为{*模具编号(唯一)}";
                return Message;
            }
            else if (excelTable[1].Columns[1].ColumnName != "*模具名称")
            else if (excelTable[0].Columns[1].ColumnName != "*模具名称")
            {
                code = "301";
                Message = "模具清单模板：表头信息不符合规范,第2列应为{*模具名称}";
                return Message;
            }
            else if (excelTable[1].Columns[2].ColumnName != "规格型号")
            else if (excelTable[0].Columns[2].ColumnName != "规格型号")
            {
                code = "301";
                Message = "模具清单模板：表头信息不符合规范,第3列应为{规格型号}";
                return Message;
            }
            else if (excelTable[1].Columns[3].ColumnName != "*状态")
            else if (excelTable[0].Columns[3].ColumnName != "*状态")
            {
                code = "301";
                Message = "模具清单模板：表头信息不符合规范,第4列应为{*状态}";
                return Message;
            }
            else if (excelTable[1].Columns[4].ColumnName != "*仓库编码")
            else if (excelTable[0].Columns[4].ColumnName != "*仓库编码")
            {
                code = "301";
                Message = "模具清单模板：表头信息不符合规范,第5列应为{*仓库编码}";
@@ -1105,7 +1105,7 @@
                Message = "模具关联产品模板：表头信息不符合规范,第1列应为{模具编码}";
                return Message;
            }
            else if (excelTable[0].Columns[1].ColumnName != "产品编码")
            else if (excelTable[1].Columns[1].ColumnName != "产品编码")
            {
                code = "301";
                Message = "模具关联产品模板：表头信息不符合规范,第2列应为{产品编码}";
@@ -1165,82 +1165,203 @@
        }
        #endregion

        #region【Excel模板上传验证,工装保养模板】
        public static string Fourteen(string FileCode, out string code)
        #region【Excel模板上传验证,模具点检标准模板】
        public static string Thirteen_one(List<DataTable> excelTable, out string code)
        {
            string Message = "";
            code = "";
            List<DataTable> excelTable = new List<DataTable>();
            excelTable = ImportExcel.ExcelToTableList(FileCode);
            if (excelTable.Count != 2)
            {
                code = "300";
                Message = "模板不符合规范,缺失的Sheet";
                code = "301";
                Message = "导入模板不符合规范,请检查sheet数";
                return Message;

            }
            else if (excelTable[0].Columns.Count != 3)
            {
                code = "300";
                Message = "模板不符合规范,请检查列名字段数";
                code = "301";
                Message = "模具点检标准模板不符合规范,请检查列名字段数";
                return Message;
            }
            else if (excelTable[1].Columns.Count != 8)
            else if (excelTable[1].Columns.Count != 5)
            {
                code = "300";
                Message = "模板不符合规范,请检查列名字段数";
                code = "301";
                Message = "关联模具点检部位模板不符合规范,请检查列名字段数";
                return Message;
            }
            else if (excelTable[0].Columns[0].ColumnName != "序号")
            else if (excelTable[0].Columns[0].ColumnName != "*模具点检标准编号(唯一)")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "模具点检标准模板：表头信息不符合规范,第1列应为{*模具点检标准编号(唯一)}";
                return Message;
            }
            else if (excelTable[0].Columns[1].ColumnName != "保养标准(唯一)")
            else if (excelTable[0].Columns[1].ColumnName != "*模具点检标准名称")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "模具点检标准模板：表头信息不符合规范,第2列应为{*模具点检标准名称}";
                return Message;
            }
            else if (excelTable[0].Columns[2].ColumnName != "标准名称（唯一）")
            else if (excelTable[0].Columns[2].ColumnName != "标准描述")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "模具点检标准模板：表头信息不符合规范,第3列应为{标准描述}";
                return Message;
            }
            else if (excelTable[1].Columns[0].ColumnName != "序号")
            else if (excelTable[1].Columns[0].ColumnName != "*模具点检标准编号")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "关联模具点检部位模板：表头信息不符合规范,第1列应为{*模具点检标准编号}";
                return Message;
            }
            else if (excelTable[1].Columns[1].ColumnName != "保养标准")
            else if (excelTable[1].Columns[1].ColumnName != "*点检项序号")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "关联模具点检部位模板：表头信息不符合规范,第2列应为{*点检项序号}";
                return Message;
            }
            else if (excelTable[1].Columns[2].ColumnName != "标准名称")
            else if (excelTable[1].Columns[2].ColumnName != "*模具点检项编号(唯一)")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "关联模具点检部位模板：表头信息不符合规范,第3列应为{*模具点检项编号(唯一)}";
                return Message;
            }
            else if (excelTable[1].Columns[3].ColumnName != "SEQ(部位顺序)")
            else if (excelTable[1].Columns[3].ColumnName != "*模具点检项名称")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "关联模具点检部位模板：表头信息不符合规范,第4列应为{*模具点检项名称}";
                return Message;
            }
            else if (excelTable[1].Columns[4].ColumnName != "部位条码（唯一）")
            else if (excelTable[1].Columns[4].ColumnName != "点检项要求")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "301";
                Message = "关联模具点检部位模板：表头信息不符合规范,第5列应为{点检项要求}";
                return Message;
            }
            else if (excelTable[1].Columns[5].ColumnName != "部位名称")
            else
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
                code = "200";
                Message = "模板检验通过";
            }
            else if (excelTable[1].Columns[6].ColumnName != "保养要求")
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
            return Message;
            }
            else if (excelTable[1].Columns[7].ColumnName != "保养等级")
        #endregion

        #region【Excel模板上传验证,模具保养项模板】
        public static string Fourteen(List<DataTable> excelTable, out string code)
            {
                code = "300";
                Message = "模板不符合规范,请检查列名";
            string Message = "";
            code = "";
            if (excelTable.Count != 1)
            {
                code = "301";
                Message = "导入模板不符合规范,请检查sheet数";
                return Message;

            }
            else if (excelTable[0].Columns.Count != 3)
            {
                code = "301";
                Message = "模具保养项目模板不符合规范,请检查列名字段数";
                return Message;
            }
            else if (excelTable[0].Columns[0].ColumnName != "*保养项目编号(唯一)")
            {
                code = "301";
                Message = "模具保养项目模板：表头信息不符合规范,第1列应为{*保养项目编号(唯一)}";
                return Message;
            }
            else if (excelTable[0].Columns[1].ColumnName != "*保养项目名称")
            {
                code = "301";
                Message = "模具保养项目模板：表头信息不符合规范,第2列应为{*保养项目名称}";
                return Message;
            }
            else if (excelTable[0].Columns[2].ColumnName != "要求描述")
            {
                code = "301";
                Message = "模具保养项目模板：表头信息不符合规范,第3列应为{要求描述}";
                return Message;
            }
            else
            {
                code = "200";
                Message = "模板检验通过";
            }
            return Message;
        }
        #endregion

        #region【Excel模板上传验证,模具保养标准模板】
        public static string Fourteen_one(List<DataTable> excelTable, out string code)
        {
            string Message = "";
            code = "";
            if (excelTable.Count != 2)
            {
                code = "301";
                Message = "导入模板不符合规范,请检查sheet数";
                return Message;

            }
            else if (excelTable[0].Columns.Count != 3)
            {
                code = "301";
                Message = "模具保养标准模板不符合规范,请检查列名字段数";
                return Message;
            }
            else if (excelTable[1].Columns.Count != 5)
            {
                code = "301";
                Message = "关联模具保养部位模板不符合规范,请检查列名字段数";
                return Message;
            }
            else if (excelTable[0].Columns[0].ColumnName != "*模具保养标准编号(唯一)")
            {
                code = "301";
                Message = "模具保养标准模板：表头信息不符合规范,第1列应为{*模具保养标准编号(唯一)}";
                return Message;
            }
            else if (excelTable[0].Columns[1].ColumnName != "*模具保养标准名称")
            {
                code = "301";
                Message = "模具保养标准模板：表头信息不符合规范,第2列应为{*模具保养标准名称}";
                return Message;
            }
            else if (excelTable[0].Columns[2].ColumnName != "标准描述")
            {
                code = "301";
                Message = "模具保养标准模板：表头信息不符合规范,第3列应为{标准描述}";
                return Message;
            }
            else if (excelTable[1].Columns[0].ColumnName != "*模具保养标准编号")
            {
                code = "301";
                Message = "关联模具保养部位模板：表头信息不符合规范,第1列应为{*模具保养标准编号}";
                return Message;
            }
            else if (excelTable[1].Columns[1].ColumnName != "*保养项序号")
            {
                code = "301";
                Message = "关联模具保养部位模板：表头信息不符合规范,第2列应为{*保养项序号}";
                return Message;
            }
            else if (excelTable[1].Columns[2].ColumnName != "*模具保养项编号(唯一)")
            {
                code = "301";
                Message = "关联模具保养部位模板：表头信息不符合规范,第3列应为{*模具保养项编号(唯一)}";
                return Message;
            }
            else if (excelTable[1].Columns[3].ColumnName != "*模具保养项名称")
            {
                code = "301";
                Message = "关联模具保养部位模板：表头信息不符合规范,第4列应为{*模具保养项名称}";
                return Message;
            }
            else if (excelTable[1].Columns[4].ColumnName != "保养项要求")
            {
                code = "301";
                Message = "关联模具保养部位模板：表头信息不符合规范,第5列应为{保养项要求}";
                return Message;
            }
            else
            {
@@ -3430,7 +3551,7 @@
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*点检项目名称}";
                        erro.ErrorCont = "模具点检项目表:{*点检项目名称}字段" + excelTable[1].Rows[k][1].ToString().Trim() + "已存在";
                        erro.ErrorCont = "模具点检项目表:{*点检项目名称}字段" + excelTable[0].Rows[k][1].ToString().Trim() + "已存在";
                        list.Add(erro);
                    }
                }
@@ -3456,16 +3577,282 @@
        }
        #endregion

        #region【Excel上传数据验证,工装保养】
        public static List<ExcelErro> FourteenData(string FileCode, out string StuCode, out string message, out int count)
        #region【Excel上传数据验证,模具点检标准】
        public static List<ExcelErro> Thirteen_oneData(List<DataTable> excelTable, out string StuCode, out string message, out int count)
        {
            message = "";
            StuCode = "";
            count = 0;
            string sql = "";
            var dynamicParams = new DynamicParameters();
            DataTable dt;
            List<ExcelErro> list = new List<ExcelErro>();
            list = ImportExcel.InportExcelToTableListErro(excelTable);    //验证Excel数据必填字段是否为空、唯一字段是否重复
            //模具点检标准表是否已存在点检标准
            for (int j = 0; j < excelTable[0].Rows.Count; j++)
            {
                if (excelTable[0].Rows[j][0].ToString().Trim() != null && excelTable[0].Rows[j][0].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldchk_Main where code=@code";
                    dynamicParams.Add("@code", excelTable[0].Rows[j][0].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count > 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具点检标准编号(唯一)}";
                        erro.ErrorCont = "模具点检标准表:{*模具点检标准编号(唯一)}字段" + excelTable[0].Rows[j][0].ToString().Trim() + "在数据表中已存在";
                        list.Add(erro);
                    }
                    //通过模具点检标准页签模板中的标准编码查询模具点检项页签模板中对应的数据信息
                    var var_dtTable = excelTable[1].AsEnumerable().Where<DataRow>(W => W["*模具点检标准编号"].ToString() == excelTable[0].Rows[j][0].ToString().Trim());
                    DataTable ds = var_dtTable.Any() ? var_dtTable.CopyToDataTable() : excelTable[1].Clone();
                    if (ds.Rows.Count > 0)
                    {
                        //判断点检标准查询点检项数据是否有重复
                        DataTable distinct1 = ds.DefaultView.ToTable(true, "*模具点检项编号(唯一)");
                        if (distinct1.Rows.Count != ds.Rows.Count)
                        {
                            ExcelErro erro = new ExcelErro();
                            erro.RoeNumber = "/";
                            erro.ErrorField = "{*模具点检项编号(唯一)}";
                            erro.ErrorCont = "模具点检项页签模板:{*模具点检标准编号}:" + excelTable[1].Rows[j][0].ToString().Trim() + " 对应{*模具点检项编号(唯一)}有重复";
                            list.Add(erro);
                        }
                    }
                    else
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具点检项编号(唯一)}";
                        erro.ErrorCont = "模具点检项页签模板:{*模具点检标准编号}:" + excelTable[1].Rows[j][0].ToString().Trim() + " 在模具点检标准页签模板中不存在";
                        list.Add(erro);
                    }
                }
            }
            //当前Excel数据中点检项页签中,模具点检项编号(唯一)在模具点检部位表中是否存在
            for (int k = 0; k < excelTable[1].Rows.Count; k++)
            {
                if (excelTable[1].Rows[k][2].ToString().Trim() != null && excelTable[1].Rows[k][2].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldchk_Item where code=@code";
                    dynamicParams.Add("@code", excelTable[1].Rows[k][2].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count < 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具点检项编号(唯一)}";
                        erro.ErrorCont = "模具点检部位表:{*模具点检项编号(唯一)}字段" + excelTable[1].Rows[k][2].ToString().Trim() + "在数据表中不存在";
                        list.Add(erro);
                    }
                }
            }
            //判断子表外键不存在于主表主键中的数据
            var dt3 = from r in excelTable[1].AsEnumerable()
                      where !(
                          from rr in excelTable[0].AsEnumerable()
                          select rr.Field<string>("*模具点检标准编号(唯一)")
                      ).Contains(r.Field<string>("*模具点检标准编号"))
                      select r;
            List<DataRow> listRow = dt3.ToList();
            if (listRow.Count > 0)
            {
                ExcelErro erro = new ExcelErro();
                erro.RoeNumber = "/";
                erro.ErrorField = "{*模具点检标准编号}";
                erro.ErrorCont = "模具点检项页签模板:{*模具点检标准编号}字段中有值在模具点检标准页签模板:{*模具点检标准编号(唯一)}中不存在";
                list.Add(erro);
            }
            if (list.Count > 0)
            {
                int index = 0;
                foreach (ExcelErro item in list)
                {
                    index++;
                    item.Seq = index.ToString();
                }
                StuCode = "301";
                message = "数据验证失败";
            }
            else
            {
                StuCode = "200";
                message = "数据验证成功";
                count = excelTable[0].Rows.Count + excelTable[1].Rows.Count;
            }
            return list;
        }
        #endregion

        #region【Excel上传数据验证,模具保养项目】
        public static List<ExcelErro> FourteenData(List<DataTable> excelTable, out string StuCode, out string message, out int count)
        {
            message = "";
            StuCode = "";
            count = 0;
            string sql = "";
            var dynamicParams = new DynamicParameters();
            DataTable dt;
            List<ExcelErro> list = new List<ExcelErro>();
            list = ImportExcel.InportExcelToTableListErro(excelTable);    //验证Excel数据必填字段是否为空、唯一字段是否重复
            //模具保养项目表
            for (int k = 0; k < excelTable[0].Rows.Count; k++)
            {
                if (excelTable[0].Rows[k][0].ToString().Trim() != null && excelTable[0].Rows[k][0].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldmai_Item where code=@code";
                    dynamicParams.Add("@code", excelTable[0].Rows[k][0].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count > 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*保养项目编号(唯一)}";
                        erro.ErrorCont = "模具保养项目:{*保养项目编号(唯一)}字段" + excelTable[0].Rows[k][0].ToString().Trim() + "已存在";
                        list.Add(erro);
                    }
                }
                if (excelTable[0].Rows[k][1].ToString().Trim() != null && excelTable[0].Rows[k][1].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldmai_Item where name=@name";
                    dynamicParams.Add("@name", excelTable[0].Rows[k][1].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count > 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*保养项目名称}";
                        erro.ErrorCont = "模具保养项目表:{*保养项目名称}字段" + excelTable[0].Rows[k][1].ToString().Trim() + "已存在";
                        list.Add(erro);
                    }
                }
            }
            if (list.Count > 0)
            {
                int index = 0;
                foreach (ExcelErro item in list)
                {
                    index++;
                    item.Seq = index.ToString();
                }
                StuCode = "301";
                message = "数据验证失败";
            }
            else
            {
                StuCode = "200";
                message = "数据验证成功";
                count = excelTable[0].Rows.Count;
            }
            return list;
        }
        #endregion

        #region【Excel上传数据验证,模具保养标准】
        public static List<ExcelErro> FourteenData_one(List<DataTable> excelTable, out string StuCode, out string message, out int count)
        {
            message = "";
            StuCode = "";
            count = 0;
            string sql = "";
            var dynamicParams = new DynamicParameters();
            DataTable dt;
            List<ExcelErro> list = new List<ExcelErro>();
            list = ImportExcel.InportExcelToTableListErro(excelTable);    //验证Excel数据必填字段是否为空、唯一字段是否重复
            //模具保养标准表是否已存在保养标准
            for (int j = 0; j < excelTable[0].Rows.Count; j++)
            {
                if (excelTable[0].Rows[j][0].ToString().Trim() != null && excelTable[0].Rows[j][0].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldmai_Main where code=@code";
                    dynamicParams.Add("@code", excelTable[0].Rows[j][0].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count > 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具保养标准编号(唯一)}";
                        erro.ErrorCont = "模具保养标准表:{*模具保养标准编号(唯一)}字段" + excelTable[0].Rows[j][0].ToString().Trim() + "在数据表中已存在";
                        list.Add(erro);
                    }
                    //通过模具保养标准页签模板中的标准编码查询模具保养项页签模板中对应的数据信息
                    var var_dtTable = excelTable[1].AsEnumerable().Where<DataRow>(W => W["*模具保养标准编号"].ToString() == excelTable[0].Rows[j][0].ToString().Trim());
                    DataTable ds = var_dtTable.Any() ? var_dtTable.CopyToDataTable() : excelTable[1].Clone();
                    if (ds.Rows.Count > 0)
                    {
                        //判断保养标准查询保养项数据是否有重复
                        DataTable distinct1 = ds.DefaultView.ToTable(true, "*模具保养项编号(唯一)");
                        if (distinct1.Rows.Count != ds.Rows.Count)
                        {
                            ExcelErro erro = new ExcelErro();
                            erro.RoeNumber = "/";
                            erro.ErrorField = "{*模具保养项编号(唯一)}";
                            erro.ErrorCont = "模具保养项页签模板:{*模具保养标准编号}:" + excelTable[1].Rows[j][0].ToString().Trim() + " 对应{*模具保养项编号(唯一)}有重复";
                            list.Add(erro);
                        }
                    }
                    else
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具保养项编号(唯一)}";
                        erro.ErrorCont = "模具保养项页签模板:{*模具保养标准编号}:" + excelTable[1].Rows[j][0].ToString().Trim() + " 在模具保养标准页签模板中不存在";
                        list.Add(erro);
                    }
                }
            }
            //当前Excel数据中保养项页签中,模具保养项编号(唯一)在模具保养部位表中是否存在
            for (int k = 0; k < excelTable[1].Rows.Count; k++)
            {
                if (excelTable[1].Rows[k][2].ToString().Trim() != null && excelTable[1].Rows[k][2].ToString().Trim() != "")
                {
                    sql = @"select *  from TMouldmai_Item where code=@code";
                    dynamicParams.Add("@code", excelTable[1].Rows[k][2].ToString().Trim());
                    dt = DapperHelper.selectdata(sql, dynamicParams);
                    if (dt.Rows.Count < 0)
                    {
                        ExcelErro erro = new ExcelErro();
                        erro.RoeNumber = "/";
                        erro.ErrorField = "{*模具保养项编号(唯一)}";
                        erro.ErrorCont = "模具保养部位表:{*模具保养项编号(唯一)}字段" + excelTable[1].Rows[k][2].ToString().Trim() + "在数据表中不存在";
                        list.Add(erro);
                    }
                }
            }
            //判断子表外键不存在于主表主键中的数据
            var dt3 = from r in excelTable[1].AsEnumerable()
                      where !(
                          from rr in excelTable[0].AsEnumerable()
                          select rr.Field<string>("*模具保养标准编号(唯一)")
                      ).Contains(r.Field<string>("*模具保养标准编号"))
                      select r;
            List<DataRow> listRow = dt3.ToList();
            if (listRow.Count > 0)
            {
                ExcelErro erro = new ExcelErro();
                erro.RoeNumber = "/";
                erro.ErrorField = "{*模具保养标准编号}";
                erro.ErrorCont = "模具保养项页签模板:{*模具保养标准编号}字段中有值在模具保养标准页签模板:{*模具保养标准编号(唯一)}中不存在";
                list.Add(erro);
            }
            if (list.Count > 0)
            {
                int index = 0;
                foreach (ExcelErro item in list)
                {
                    index++;
                    item.Seq = index.ToString();
                }
                StuCode = "301";
                message = "数据验证失败";
            }
            else
            {
                StuCode = "200";
                message = "数据验证成功";
                count = excelTable[0].Rows.Count + excelTable[1].Rows.Count;
            }
            return list;
        }
        #endregion
@@ -5114,14 +5501,186 @@
        }
        #endregion

        #region【Excel数据上传,工装保养】
        public static string FourteenSubmit(string FileCode, string User, out string StuCode)
        #region【Excel数据上传,模具点检标准】
        public static string Thirteen_oneSubmit(List<DataTable> excelTable, User us, out string StuCode)
        {
            string message = "";
            StuCode = "";
            string sql = "";
            List<object> list = new List<object>();
            var dynamicParams = new DynamicParameters();
            try
            {
                list.Clear();
                //导入模具点检标准主表
                for (int k = 0; k < excelTable[0].Rows.Count; k++)
                {
                    sql = @"insert into TMouldchk_Main(code,name,description,lm_user,lm_date) 
                            values(@code,@name,@description,@Operator,@CreateDate)";
                    list.Add(new
                    {
                        str = sql,
                        parm = new
                        {
                            code = excelTable[0].Rows[k][0].ToString().Trim(),
                            name = excelTable[0].Rows[k][1].ToString().Trim(),
                            description = excelTable[0].Rows[k][2].ToString().Trim(),
                            CreateDate = DateTime.Now.ToString(),
                            Operator = us.usercode
                        }
                    });
                }
                //导入模具点检标准关联点检项子表
                for (int i = 0; i < excelTable[1].Rows.Count; i++)
                {
                    sql = @"insert into TMouldchk_Deta(seq,code,name,mouldchk_main_code,chkdesc,lm_user,lm_date) 
                            values(@seq,@code,@name,@mouldchk_main_code,@description,@Operator,@CreateDate)";
                    list.Add(new
                    {
                        str = sql,
                        parm = new
                        {
                            seq = excelTable[1].Rows[i][1].ToString().Trim(),
                            code = excelTable[1].Rows[i][2].ToString().Trim(),
                            name = excelTable[1].Rows[i][3].ToString().Trim(),
                            mouldchk_main_code = excelTable[1].Rows[i][0].ToString().Trim(),
                            description = excelTable[1].Rows[i][4].ToString().Trim(),
                            Operator = us.usercode,
                            CreateDate = DateTime.Now.ToString()
                        }
                    });
                }
                bool aa = DapperHelper.DoTransaction(list);
                if (aa)
                {
                    StuCode = "200";
                    message = "导入成功！";
                }
                else
                {
                    StuCode = "300";
                    message = "导入失败！";
                }
            }
            catch (Exception e)
            {
                StuCode = "300";
                message = e.Message;
            }
            return message;
        }
        #endregion

        #region【Excel数据上传,模具保养项目】
        public static string FourteenSubmit(List<DataTable> excelTable, User us, out string StuCode)
        {
            string message = "";
            StuCode = "";
            string sql = "";
            List<object> list = new List<object>();
            var dynamicParams = new DynamicParameters();
            try
            {
                list.Clear();
                //导入模具保养项目表
                for (int i = 0; i < excelTable[0].Rows.Count; i++)
                {
                    sql = @"insert into TMouldmai_Item(code,name,description,lm_user,lm_date) 
                            values(@code,@name,@description,@lm_user,@lm_date)";
                    list.Add(new
                    {
                        str = sql,
                        parm = new
                        {
                            code = excelTable[0].Rows[i][0].ToString().Trim(),
                            name = excelTable[0].Rows[i][1].ToString().Trim(),
                            description = excelTable[0].Rows[i][2].ToString().Trim(),
                            lm_user = us.usercode,
                            lm_date = DateTime.Now.ToString()
                        }
                    });
                }
                bool aa = DapperHelper.DoTransaction(list);
                if (aa)
                {
                    StuCode = "200";
                    message = "导入成功！";
                }
                else
                {
                    StuCode = "300";
                    message = "导入失败！";
                }
            }
            catch (Exception e)
            {
                StuCode = "300";
                message = e.Message;
            }
            return message;
        }
        #endregion

        #region【Excel数据上传,模具保养标准】
        public static string Fourteen_oneSubmit(List<DataTable> excelTable, User us, out string StuCode)
        {
            string message = "";
            StuCode = "";
            string sql = "";
            List<object> list = new List<object>();
            var dynamicParams = new DynamicParameters();
            try
            {
                list.Clear();
                //导入模具保养标准主表
                for (int k = 0; k < excelTable[0].Rows.Count; k++)
                {
                    sql = @"insert into TMouldmai_Main(code,name,description,lm_user,lm_date) 
                            values(@code,@name,@description,@Operator,@CreateDate)";
                    list.Add(new
                    {
                        str = sql,
                        parm = new
                        {
                            code = excelTable[0].Rows[k][0].ToString().Trim(),
                            name = excelTable[0].Rows[k][1].ToString().Trim(),
                            description = excelTable[0].Rows[k][2].ToString().Trim(),
                            CreateDate = DateTime.Now.ToString(),
                            Operator = us.usercode
                        }
                    });
                }
                //导入模具保养标准关联保养项子表
                for (int i = 0; i < excelTable[1].Rows.Count; i++)
                {
                    sql = @"insert into TMouldmai_Deta(seq,code,name,mouldmai_main_code,chkdesc,lm_user,lm_date) 
                            values(@seq,@code,@name,@mouldmai_main_code,@description,@Operator,@CreateDate)";
                    list.Add(new
                    {
                        str = sql,
                        parm = new
                        {
                            seq = excelTable[1].Rows[i][1].ToString().Trim(),
                            code = excelTable[1].Rows[i][2].ToString().Trim(),
                            name = excelTable[1].Rows[i][3].ToString().Trim(),
                            mouldmai_main_code = excelTable[1].Rows[i][0].ToString().Trim(),
                            description = excelTable[1].Rows[i][4].ToString().Trim(),
                            Operator = us.usercode,
                            CreateDate = DateTime.Now.ToString()
                        }
                    });
                }
                bool aa = DapperHelper.DoTransaction(list);
                if (aa)
                {
                    StuCode = "200";
                    message = "导入成功！";
                }
                else
                {
                    StuCode = "300";
                    message = "导入失败！";
                }
            }
            catch (Exception e)
            {