PDMesApi.git - Gitblit

			@@ -73,8 +73,8 @@
			}
			if (isend == "Y") //当前工序是末道工序
			{
			rt.nextstepcode = data.Rows[0]["STEPCODE"].ToString();//当前工序编码
			rt.nextstepname = data.Rows[0]["STEPNAME"].ToString();//当前工序名称
			rt.nextstepcode = "";//data.Rows[0]["STEPCODE"].ToString();//当前工序编码
			rt.nextstepname = "";// data.Rows[0]["STEPNAME"].ToString();//当前工序名称
			}
			}
			else
			@@ -106,8 +106,9 @@
			{
			decimal good_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //报工总数量
			decimal ng_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum(); //不良数量
			decimal bad_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //报废数量

			decimal kbqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - (good_qty + ng_qty); //剩余可报工数量=任务数量-(报工数量+不良数量)
			decimal kbqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - (good_qty + ng_qty+bad_qty); //剩余可报工数量=任务数量-(报工数量+不良数量+报废数量)
			if (kbqty <= 0)//无可报工数量
			{
			mes.code = "300";
			@@ -120,8 +121,8 @@
			{
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //开工数量=任务数量
			rt.noreportqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - good_qty- ng_qty; //未报数量=任务数量-已报数量-不良数量
			rt.reportqty = good_qty + ng_qty; //已报数量=报工数量-不良数量
			rt.noreportqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - good_qty- ng_qty-bad_qty; //未报数量=任务数量-已报数量-不良数量-报废数量
			rt.reportqty = good_qty + ng_qty+bad_qty; //已报数量=报工数量+不良数量+报废数量
			mes.code = "200";
			mes.count = 1;
			mes.Message = "弹窗报工界面!";
			@@ -190,8 +191,9 @@
			decimal sgood_qty = data3.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //上道报工总数量
			decimal good_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //本道报工总数量
			decimal ng_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum(); //本道不良总数量
			decimal bad_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道总报废数量

			decimal sybqty = sgood_qty - good_qty - ng_qty;//本道剩余可报数量=上道报工总数量-本道报工总数量-本道不良总数量
			decimal sybqty = sgood_qty - good_qty - ng_qty-bad_qty;//本道剩余可报数量=上道报工总数量-本道报工总数量-本道不良总数量-本道报废总数
			if (sybqty <= 0)
			{
			mes.code = "300";
			@@ -205,7 +207,7 @@
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = sybqty; //开工数量=本道剩余可报数量
			rt.noreportqty = sybqty; //未报数量=本道剩余可报数量
			rt.reportqty = good_qty + ng_qty; //已报数量=本道报工总数量+本道报工总不良
			rt.reportqty = good_qty + ng_qty+bad_qty; //已报数量=本道报工总数量+本道报工总不良+本道报废总数
			mes.code = "200";
			mes.count = 1;
			mes.Message = "弹窗报工界面!";
			@@ -232,9 +234,10 @@
			{
			decimal sqty = data3.AsEnumerable().Select(d => d.Field<decimal>("SQTY")).Sum(); //上道收料数量
			decimal good_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //本道报工总数量
			decimal ng_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //本道不良总数量
			decimal ng_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum(); //本道不良总数量
			decimal bad_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道总报废数量

			decimal sybqty = sqty - good_qty - ng_qty;//本道剩余可报数量=上道收料总数量-本道报工总数量-本道不良总数量
			decimal sybqty = sqty - good_qty - ng_qty-bad_qty;//本道剩余可报数量=上道收料总数量-本道报工总数量-本道不良总数量-本道总报废数
			if (sybqty <= 0)
			{
			mes.code = "300";
			@@ -248,7 +251,7 @@
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = sybqty; //开工数量=本道剩余可报数量
			rt.noreportqty = sybqty; //未报数量=本道剩余可报数量
			rt.reportqty = good_qty + ng_qty; //已报数量=本道报工总数量+本道报工总不良
			rt.reportqty = good_qty + ng_qty+bad_qty; //已报数量=本道报工总数量+本道报工总不良+本道总报废数
			mes.code = "200";
			mes.count = 1;
			mes.Message = "弹窗报工界面!";
			@@ -307,11 +310,11 @@
			if (data3.Rows.Count > 0) //上道有收料
			{
			decimal sqty = data3.AsEnumerable().Select(d =>d.Field<decimal>("SQTY")).Sum();//上道收料数量
			decimal sybqty = sqty; //本道剩余可报数量=上道收料数量
			decimal sybqty = sqty; //本道剩余可收数量=上道收料数量

			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = sybqty; //开工数量=本道剩余可报数量
			rt.noreportqty = sybqty; //未报数量=本道剩余可报数量
			rt.startqty = sybqty; //开工数量=本道剩余可收数量
			rt.noreportqty = sybqty; //未报数量=本道剩余可收数量
			rt.reportqty = 0; //已报数量
			mes.code = "200";
			mes.count = 1;
			@@ -342,6 +345,7 @@
			{
			string good_qty = data2.Rows[0]["GOOD_QTY"].ToString();//报工数量
			string ng_qty = data2.Rows[0]["NG_QTY"].ToString();// 不良数量
			string bad_qty = data2.Rows[0]["BAD_QTY"].ToString();// 报废数量

			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = decimal.Parse(good_qty); //开工数量=(上一道的报工数量)
			@@ -372,6 +376,7 @@
			{
			decimal sqty = data2.AsEnumerable().Select(d => d.Field<decimal>("SQTY")).Sum();//收料数量
			decimal ng_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();// 不良数量
			decimal bad_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum();// 报废数量

			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.startqty = sqty; //开工数量=(上一道的收料数量)
			@@ -488,8 +493,8 @@
			}
			if (isend == "Y") //当前工序是末道工序
			{
			rt.nextstepcode = data.Rows[0]["STEPCODE"].ToString();//当前工序编码
			rt.nextstepname = data.Rows[0]["STEPNAME"].ToString();//当前工序名称
			rt.nextstepcode = "";// data.Rows[0]["STEPCODE"].ToString();//当前工序编码
			rt.nextstepname = "";// data.Rows[0]["STEPNAME"].ToString();//当前工序名称
			}
			}
			else
			@@ -523,7 +528,8 @@
			{
			decimal fqty = data0.AsEnumerable().Select(d => d.Field<decimal>("FQTY")).Sum(); //发料数量
			decimal ng_qty =data0.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();// 不良数量
			decimal kfqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - fqty - ng_qty; //剩余可发数量
			decimal bad_qty = data0.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //报废数量
			decimal kfqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()) - fqty - ng_qty- bad_qty; //剩余可发数量
			if (kfqty <= 0)
			{
			mes.code = "300";
			@@ -587,8 +593,9 @@
			decimal sgood_qty = data3.AsEnumerable().Select(d => d.Field<decimal>("GOOD_QTY")).Sum(); //本道报工总数量
			decimal sqty = data1.AsEnumerable().Select(d => d.Field<decimal>("FQTY")).Sum();//本道发料数量
			decimal ng_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();// 本道不良数量
			decimal bad_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道报废数量

			decimal sybqty =sgood_qty - sqty - ng_qty;//本道剩余可发数量=上道报工数量-本道发料数量-本道不良数量
			decimal sybqty =sgood_qty - sqty - ng_qty- bad_qty;//本道剩余可发数量=上道报工数量-本道发料数量-本道不良数量-本道报废数量
			if (sybqty <= 0)
			{
			mes.code = "300";
			@@ -601,7 +608,7 @@
			{
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.noreportqty = sybqty; //未发数量=剩余可发数量
			rt.reportqty = sqty + ng_qty; //已发数量= 本道发料数量+本道不良数量
			rt.reportqty = sqty + ng_qty+bad_qty; //已发数量= 本道发料数量+本道不良数量+本道报废数量
			rt.startqty = sybqty; //收料数量=剩余可发数量

			mes.code = "200";
			@@ -631,8 +638,9 @@
			decimal ssqty = data3.AsEnumerable().Select(d => d.Field<decimal>("SQTY")).Sum();//上道收料数量
			decimal sqty = data1.AsEnumerable().Select(d => d.Field<decimal>("FQTY")).Sum();//本道发料数量
			decimal ng_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();// 本道不良数量
			decimal bad_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道报废数量

			decimal sybqty = ssqty - sqty - ng_qty;//本道剩余可发数量=上道收料数量-本道发料数量-本道不良数量
			decimal sybqty = ssqty - sqty - ng_qty-bad_qty;//本道剩余可发数量=上道收料数量-本道发料数量-本道不良数量-本道报废数量
			if (sybqty <= 0)
			{
			mes.code = "300";
			@@ -645,7 +653,7 @@
			{
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.noreportqty = sybqty; //未发数量=剩余可发数量
			rt.reportqty = sqty + ng_qty; //已发数量= 本道发料数量+本道不良数量
			rt.reportqty = sqty + ng_qty+bad_qty; //已发数量= 本道发料数量+本道不良数量+本道报废数量
			rt.startqty = sybqty; //收料数量=剩余可发数量

			mes.code = "200";
			@@ -786,7 +794,8 @@
			decimal fqty = data0.AsEnumerable().Select(d => d.Field<decimal>("FQTY")).Sum();//本道发料数量
			decimal sqty = data1.AsEnumerable().Select(d => d.Field<decimal>("SQTY")).Sum();//本道收料数量
			decimal ng_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();//本道不良数量
			decimal ksqty = fqty - sqty - ng_qty; //剩余可发数量=本道发料数量-本道收料数量-本道不良数量
			decimal bad_qty = data1.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道报废数量
			decimal ksqty = fqty - sqty - ng_qty+bad_qty; //剩余可发数量=本道发料数量-本道收料数量-本道不良数量-本道报废数量
			if (ksqty <= 0)
			{
			mes.code = "300";
			@@ -799,7 +808,7 @@
			{
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.noreportqty = ksqty; //未收数量=本道发料数量
			rt.reportqty = sqty + ng_qty; //已收数量
			rt.reportqty = sqty + ng_qty+bad_qty; //已收数量
			rt.startqty = ksqty; //收料数量=本道发料数量

			mes.code = "200";
			@@ -862,7 +871,8 @@
			decimal fqty = data1.AsEnumerable().Select(d => d.Field<decimal>("FQTY")).Sum();//本道发料数量
			decimal sqty = data2.AsEnumerable().Select(d => d.Field<decimal>("SQTY")).Sum();//本道收料数量
			decimal ng_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("NG_QTY")).Sum();//本道不良数量
			decimal ksqty = fqty - sqty - ng_qty; //剩余可发数量=本道发料数量-本道收料数量-本道不良数量
			decimal bad_qty = data2.AsEnumerable().Select(d => d.Field<decimal>("BAD_QTY")).Sum(); //本道报废数量
			decimal ksqty = fqty - sqty - ng_qty-bad_qty;//剩余可发数量=本道发料数量-本道收料数量-本道不良数量-本道报废数量
			if (ksqty <= 0)
			{
			mes.code = "300";
			@@ -875,7 +885,7 @@
			{
			rt.planqty = decimal.Parse(data.Rows[0]["PLAN_QTY"].ToString()); //任务数量
			rt.noreportqty = ksqty; //未收数量=本道发料数量
			rt.reportqty = sqty + ng_qty; //已收数量
			rt.reportqty = sqty + ng_qty+bad_qty; //已收数量
			rt.startqty = ksqty; //收料数量=本道发料数量

			mes.code = "200";